☎ (678) 541 0249 ✉ info@multitechfinishes.com
Cracked tile, eroded grout, peeling epoxy, soft spots in the walk-in. When a commercial floor starts failing, it gets worse fast. We assess what is wrong and fix it for good.
Rocking tiles and missing grout on cook lines and dish pits.
02Soft spots, ice at seams and cracked thresholds.
Coatings that delaminate in wet, hot or cold areas.
Tiles that lift, curl and hold dirt at the joints.
Seams that shift and smell.
Cut out and welded back in, no full tear-out.
Not every bad floor needs to come out. Sometimes a section can be patched, or a new floor can go over the old one. Sometimes the substrate underneath is the real problem and has to be fixed first. We look before we quote, and we explain the options and trade-offs in plain language.
When replacement is the answer, Protect-All is designed to be repairable: if a section is ever damaged, it can be cut out, replaced and welded back in without redoing the whole room.
We walk the space, measure, check the slab or subfloor and note drains, thresholds and equipment that has to move.
You get a written scope: install system, color, cove base, drain rings, schedule and price. No guesswork on install night.
Our factory-trained crew preps the substrate, sets Protect-All in urethane adhesive and welds the seams. Most kitchens are scheduled around closed hours.
Rapid Weld seams take foot traffic in about 20 to 30 minutes; the adhesive reaches normal traffic in roughly 12 hours.
Tell us about your space. We will walk the site, check the substrate and give you a clear scope, schedule and price.
